Flash Driver for iPad 1 TV Port LCD Controller

This instruction is only for iPad 1/ 2 TV Port LCD Controller.

Before flashing, you require USB flash drive (thumb drive), and driver program. Then follow the steps:

1. Download and unzip driver
2. Format USB flash drive to FAT32
   
3. Copy Z53BKC28.bin file to USB drive
   
4. Disconnect power supply from driver board
   
5. Plug USB flash drive to USB port on driver board
   
6. Connect power supply
   
7. LED will flash fast around 130 seconds (do not disconnect power supply during the process)
   
8. After LED stop, disconnect power supply and unplug USB drive
   
9. Connect power supply and switch on driver board