Correct LCD Controller Board for LM215WF3 and LM215UH1 iMac Panels

This guide explains the differences between LM215WF3 and LM215UH1 LCD panel families and helps you select the correct controller board. What matters is the panel family, connector type, resolution, and compatible iMac generations.

LM215WF3 vs LM215UH1

LCD Panel Family Typical Panel Revisions Resolution Interface Used In iMac Models Years Controller Board Requirement
LM215WF3 SLA1, SDC2, SDD1, SDD2, SDD3, SDD4, SDD5 1920×1080 (FHD) LVDS (older) or eDP (slim models) A1311, A1418 (non-Retina) 2009–2015 Buy controller matching exact suffix
LM215UH1 SDB1, SDA1 4096×2304 (4K Retina) eDP 4-lane A1418 Retina 4K, A2116 2017–2019 Requires dedicated 4K eDP controller


LM215WF3 Family

Year iMac Model No. EMC Common Panel
2009 A1311 2308 LM215WF3-SLA1
2010 A1311 2389 LM215WF3-SLA1
2011 A1311 (older) 2428 LM215WF3-SLA1
2011 A1311 (later) 2428 LM215WF3-SDC2
2012 A1418 2544 LM215WF3-SDD1
2013 A1418 2544 / 2638 LM215WF3-SDD1 / SDD2 / SDD3
2014 A1418 2805 LM215WF3-SDD4
2015 (1080p) A1418 2889 / 3068 LM215WF3-SDD5

The LM215WF3 family was used in 21.5-inch non-Retina iMacs from 2009–2015. The older A1311 generation (use LVDS) and the thinner A1418 generation (use eDP) do not use the same controller boards because the interface changed.

 

LM215UH1 Family

Year iMac Model No. EMC Common Panel
2017 Retina 4K A1418 3069 LM215UH1-SDB1
2019 Retina 4K A2116 3195 LM215UH1-SDB1

LM215UH1 is a 21.5-inch Retina 4K panel with 4096×2304 resolution and a 4-lane eDP interface. It was used in the 2017 and 2019 Retina 4K iMacs. 

 

Always Check LCD Panel Model

  • LM215WF3 = 21.5" Full HD iMac panels (2009–2015)
  • LM215UH1 = 21.5" Retina 4K iMac panels (2017–2019)

Before purchasing a controller board, remove the panel and read the complete model number on the LCD label. The LCD panel model and suffix (SLA1, SDC2, SDD5, SDB1, etc.) is more important than the iMac model number.

ブログに戻る

コメントを残す